|
PCV Pipe Target Stand
List of Materials:
1 10 piece of 1 ½ PVC pipe 10
feet long
4 - 1 ½ PVC Tees
PVC Glue and PVC cleaner. (Small
Cans)
2 Tomato stakes 1 ½ X Ύ X 5 or
6
Make the following cuts in the 10
piece of pipe.
4 pieces 18 long (Legs)
1 piece 20 long (Center connecting
piece)
2 pieces 6 long
2 pieces 4 long
Assembly
Glue 2 of the 18 pieces to a
opposite sides of a Tee.
Repeat on second set of 18 pieces (these will be the feet).
Glue one 4 piece and one 6 piece
to opposite sides of another Tee. Repeat on second set. These are the vertical parts of stand
that will hold the stakes. The 20
piece is center connector.
Assemble, but do not glue, the vertical
parts to the feet and the center connector to vertical pieces. Insert Tomato
stakes for target stand to hold target backer.
|
